Nex-G Automation's 16 channel ethernet relay board is intended for larger control cabinets and multi-output automation systems. It combines TCP/IP-based remote switching with sixteen independently controlled outputs for compatible industrial control applications.
The 16 channel ethernet relay board provides sixteen independently controlled outputs through a compatible Ethernet control application. It is intended for larger control cabinets and multi-output automation systems. Client Mode communication allows the controller to connect to a configured server and receive supported switching commands.
The Ethernet-based output controller connects to a network and uses configured IP communication to receive switching instructions. The selected relay channel can then operate the connected electrical circuit according to the application requirements and relay contact ratings.
The network relay board connects through Ethernet, operates in its configured client mode, receives IP-based control instructions and changes the state of the selected physical relay channels.
| 01 | Network Connection | The relay board connects to the Ethernet network using TCP/IP communication. |
| 02 | Client Mode | The device uses its configured client-mode settings to connect to the target server address. |
| 03 | IP Command | The connected control application sends the required command according to the device communication interface. |
| 04 | Channel Switching | The selected relay channel changes state to control the connected electrical load. |
| 05 | Connection Monitoring | Keep-alive heartbeat packets can help monitor the network connection status. |
The TCP/IP relay module converts configured network commands into physical relay state changes for connected electrical equipment.
Designed for network-based output control, flexible relay configurations and integration into suitable industrial control environments.
| Communication Interface | Ethernet (TCP/IP) | Network communication |
| Operating Mode | Client Device Configuration | Network client operation |
| Relay Channels | 16 Channels | Individual output control |
| Relay Contact Type | SPDT / SPST | Model dependent |
| Relay Rating | Up to 250V AC / 30V DC | Up to 10A maximum, subject to contact and load conditions |
| Power Supply | 12V / 24V DC | Model dependent |
| Enclosure | Industrial Metal / ABS Housing | Model dependent |
| Mounting | DIN Rail / Wall Mount | Form-factor dependent |
| Configuration | Web Portal / Serial Utility | As supported by the model |
| Operating Temperature | −20°C to +70°C | As specified for the supplied model |
Listed ratings are product-range references and must be confirmed for this configuration. Specifications and available options may vary by model. Confirm the exact relay contact rating, supply voltage, enclosure and configuration interface before selecting a product for your application.
The 16 channel ethernet relay board can be evaluated for larger control cabinets and multi-output automation systems. Assign each required electrical circuit to an available relay output and confirm contact ratings, supply voltage and network compatibility before installation.